Generate The Activation Code; Store The Activation Code To The Omd - SEH OMD User Manual

Make sure the following points:
- The OMD has been installed and configured; see: 'First Steps'
- You are logged in on the OMD Homepage
Proceed as follows:
1. Click Service.
2. Click Licenses.
3. Note the 'Local Key' .

Generate the Activation Code

The 'Activation Code' is generated on the web page http://www.seh.de/omd.
Make sure the following points:
- The 'License Number' is at hand.
- The 'Local Key' is at hand.
Proceed as follows:
1. Call the web page http://www.seh.de/omd.
2. Follow the instructions on the web page.
3. Generate the 'Activation Code' .
4. Note the 'Activation code' .

Store the Activation Code to the OMD

In order to activate the OMD for additional output devices, the 'Activation Code'
must be stored to the OMD.
Make sure the following points:
- The 'Activation Code' is at hand
- You are logged in on the OMD Homepage
Proceed as follows:
1. Click Service.
2. Click Licenses.
3. Enter the 'Activation Code' .
4. Click Set.
The settings are saved.
User Manual
9.
11.
9.
[en]
7.
11