SEH OMD User Manual page 14

2. Select . The display shows the current IP configuration ('Manual' or 'DHCP'):
IP Configuration
Manual
3. Select 'DHCP' via
> Apply
< Back
4. Press to confirm.
The settings are saved.
Upon booting DHCP will be applied automatically. TCP/IP parameters are assigned
by a DHCP server.
Setting TCP/IP parameters via the OMD Homepage
Proceed as follows:
1. Click Configuration.
2. Click TCP/IP.
3. Enter the TCP/IP paramter manually or enable the 'DHCP' option; see Table:
TCP/IP Parameters.
4. Click Set.
The settings are saved.
Tabelle: TCP/IP Parameters
Parameter
IP address
Netmask
Gateway
DHCP
14
or and press to confirm. The display shows:
Description
IP address of the OMD (e.g. 192.168.0.21)
Netmask
IP address of the gateway used to access other networks or
subnets. This enables the OMD to communicate with devices
on other subnets.
Enable DHCP to set TCP/IP parameters via DHCP. The TCP/IP
parameters are assigned by a DHCP server during the next
reboot of the OMD.
[en] User Manual