Life Fitness UPRIGHT LIFECYCLE Operation Manual page 62

Systems Options Main Menu: Confi guration Menu: Manager
Setting
Maximum Speed
Minimum Speed
Maximum % Incline
Activity Zone Speed Keys
Stride Sensor
Fit Test Plus
Deceleration Rate
Acceleration Rate
Setting
Calorie Per Hour (CPH) Dis-
play
Steps Climbed Display
Max Acceleration Rate
Max Deceleration Rate
On / Off Lvl 0 (12-19 SPM)
Warm Up Speed Level
On / Off Lvl 21 - 25
(160-182 SPM)
High Speed Level
Minimum Speed (SPM)
Maximum Speed (SPM)
Default
TREADMILL ONLY
14.0 mph (23 k/ph )
0.5 mph (0.8 k/ph )
15.0
Enabled
On
On
3
3
Default
POWERMILL ONLY
On (International: Off)
Off
3
3
Off
On
20 SPM
160 SPM
:
Defaults
Description
Set the fastest speed the treadmill can operate.
Set the slowest speed the treadmill can operate.
This option changes the maximum incline grade to a
value lower than 15%.
This option allows the user to assign belt speed to
Walk / Jog / Run values.
This option automatically pauses the workout if the user
steps off the belt.
This option allows to enable the following Fit Tests:
Army Physical Fitness Test, Navy Physical Readiness
Test, Marines Physical Fitness Test, Air Force Fitness
Test, WFI Submax Protocol, and Physical Effi ciency
Battery.
The rate at which the treadmill decelerates to the
selected speed, ranging from 1 (slowest) to 5 (fastest).
The rate at which the treadmill accelerates to the
selected speed, ranging from 1 (slowest) to 5 (fastest).
Description
If this option is enabled, the MESSAGE CENTER dis-
plays the number of calories burned per hour during the
workout.
If this setting is enabled, the total number of steps
climbed is periodically shown during a workout.
This sets the rate at which the PowerMill Climber accel-
erates to the selected speed, ranging from
est) to fi ve (fastest).
This sets the rate at which the PowerMill Climber decel-
erates to the selected speed, ranging from
est) to fi ve (fastest).
This option, if enabled, controls whether or not Level
0 may be used in program setup or during a workout.
Level 0 corresponds to intensity levels below Level 1.
This option controls whether or not Levels 21 though
25 may be used in program setup or during a workout
(MANUAL and SPEED INTERVAL workouts ONLY).
Set the slowest speed the PowerMill can operate.
Set the fastest speed the PowerMill can operate.
one (slow-
one (slow-
61