Force Arming; Force Arm Of A Defective Area - Honeywell INTELLIGUARD 9000 User Manual

FORCE ARMING

1. Force Arm of a Defective Area

ACTION
NOTE 1: Example: "A1 OFFICE DOOR 2"
AREA #1, Office door #2 is open or door contact is defective.
Consult the "REFERENCE GUIDE" section for a description of the message.
NOTE 2: If more than one problem is detected, the first problem is displayed for two
seconds, then the second problem for another two seconds, and so on until all
corrections are made or accepted.
To accept the problem,
press
To accept
FORCE ARM,
press
Enter your ID #.
Enter your CODE #.
To stop the long tone
and exit, press
Now exit the premises
MESSAGE
A1 OFFICE DOOR 2
FORCE ARMING ? _
ID ? – –
ID ? # #
CODE ? – – – –
REQUEST ACCEPTED
AREA# ARMED
SIGNAL
NEGATIVE TONE
2 BEEPS
ACKNOWLEDGE
TONE THEN EXIT
DELAY BEEP TONE
STARTS
35