Unbypassing A Point; Unbypass Point - Honeywell INTELLIGUARD 9000 User Manual

UNBYPASSING A POINT

1. Unbypass Point

ACTION
Press
OPT
Enter your ID #.
Enter your CODE #.
Press until you reach:
UNBYPASS A POINT
To accept
UNBYPASS A POINT,
press
Enter the POINT # that
you want to unbypass.
To view additional infor-
mation on the description
of the POINT, press
NOTE 1: EXAMPLE ONLY
"a1 105 warehouse door 5" indicates that POINT # 105 is in AREA # 1 located in
the warehouse on Door # 5. "byp id 01" indicates that the user with ID # 01 re-
enabled that POINT. Consult the "REFERENCE GUIDE" section for a description
of the message.
To accept the selected
POINT, press
To select another
POINT, press
In order to select another
bypassed point, repeat the
steps illustrated above.
MESSAGE
ID ? – –
ID ? # #
CODE ? – – – –
OPTION MENU
1—BYPASS A POINT
OPTION MENU
2—UNBYPASS A POINT
POINT ? – – –
at 105 warehouse door 5
byp id01
SUCCESS 1
POINT ? – – –
SIGNAL
2 BEEPS
2 BEEPS
31