Setup/Hold Field (State Only) - HP 16550A User Reference

Setup
I
Hold field
Setup/Hold Field (State only)
The Format Menu
Setup/Hold Field (State only)
Setup/Hold adjusts the relative position of the clock edge with respect to the
time period that data is valid. When the Setup/Hold field is selected, a
configuration menu appears. Use this Setup/Hold configuration menu to
I
select each pod
in
the analyzer and assign a Setup/Hold selection from the
selection list.
With a single clock edge assigned, the choices range from 3.5 ns Setup/0.0 ns
Hold, to 0.0 ns Setup/3.5 ns Hold. With both edges of a single clock assigned,
the choices are from 4.0 ns Setup/0.0 ns Hold, to 0.0 ns Setup/4.0 ns Hold.
If
the analyzer has multiple clock edges assigned, the choices range from 4.5 ns
Setup/0.0 ns Hold, to 0.0 ns Setup/4.5 ns Hold.
Setup and hold menu
1if!i!+15'1118Ui (
Format 1
State Acquisition Mode
Full Channel/4K Memory/10N1Hz
EDGES'
QUALS'
Setup and Hold Menu
4-23