Table of Contents
Advertisement
See Also
Activity indicators
The Configuration Menu
Activity Indicators
Activity Indicators
A portion of the Configuration menu that is not a selectable field is the
I
Activity Indicators. The indicators appear in two places. One is in the pod
pair displays of this Configuration menu. The other place is in the bit
reference line in the Format menu just above the pod bit numbers.
When the logic analyzer is properly connected to an active target system, you
see either a high level dash, a low level dash, or a transitional arrow in the
Activity Indicator displays for each pod pair. These indicators are very useful
in showing proper probe connection and that the logic levels are as expected
according to the threshold level setting.
The "Bit Assignment Fields" in the Format menu chapter for more
information on the activity indicators.
!fijij*i@i!IMMI
(configuration)
Analyzer 1
Name: ( MACHINE 1 )
Type:
(
State
}
Analyzer
2
Name: ( MACHINE 2
Type:
(
State
)
Run
Unassigned Pods
r
1 ' . ________
uuuu
~:1 (B~
:--------uuuu
N_
l
B3, ----------------
L_I
82 · ---------------- K-,
Bo·------------- __ P_
84. ----------------
M_,
Activity Indicators
3-7
Advertisement
Table of Contents
