Table of Contents
Advertisement
I
The Configuration Menu
Type Field
Type Field
The Type field allows you to configure the available analyzers as a state
analyzer or a timing analyzer. When the Type field is selected, the following
choices are available.
Timing
When Timing is selected, the analyzer uses its own internal clock to clock
measurement data into the acquisition memory. This clock is asynchronous
to the signals
in
the target system. When this option is selected, some fields
specific to external clocks
will
not appear in the analyzer menus.
The analyzer can only be configured with one timing analyzer.
If
two are
selected, the first
will
be turned off.
State
When State is selected, the data analyzer uses a clock from the system under
test to clock measurement data into acquisition memory. This clock is
synchronous to the signals in the target system.
Clock type selection menu
1IMMiii+M.8
(configuration)
Analyzer 1
Name: (MACHINE 1
Name:
(Print
J
(
Run
Off
Type field
- - - - - - 1 1 - - _ _ , - - - - - - ,
Type' (
State
Type'
Unassigned Pods
(~~: ========~~~~~~~~ ~~l
_______ ·_-, (
~!:
================
~=J
Type Field
3-4
Advertisement
Table of Contents
