Barco R9002380 Installation Manual page 11

1.6 Activating projector functionality
Make sure that you have the latest version (1.5.0 or later) of the Projector Toolset.
How to activate new projector functionality?
1. Go to the service menu by clicking on the service icon (reference 1 of image 1-10) in the Projector Toolset and select the projector
which you wan to upgrade (reference 2 of image 1-10).
2. Activate "Rename FLM type" by clicking on the button "Run Upgrade" (reference 3 of image 1-10) in the "Advanced Maintenance"
section.
2
Image 1-10
As a result the sections "Validation panel" and "Upgrade FLM type" become visible.
3. Send the FLM serial number and the value of the Key in the "Validation panel" upper field (reference 4 of image 1-11) to the Barco
E-mail address:
service.mne@barco.com
Note: In case the serial number is proceeded by leading zero's, e.g 000123456, the leading zero's must remain in the number
which is sent to Barco. Otherwise, the returned Generated key will not work.
Barco will verify this Key and after approval return the Generated key.
4. Fill in the returned Generated key from Barco in the lower empty field (reference 5 of image 1-11) .
5. Click on the "Validate key" button.
R59770284 FLM UPGRADE 19/12/2008
1
1. FLM upgrade R20+→R22+ / HD18→HD20
3
9