Handling Compact Discs; Cd Playback - Goodmans 4225MP3 Instruction Manual

*
Although built to withstand a certain amount of the effects from dust,
soil and scratches, discs should be treated with the care to ensure
the longest lifetime.
*
Always protect a disc against scratches, soil and dust etc. by storing
discs in their original cases when they are not being used.
*
Bear in mind the following points, since any dirt, scratches or
warping of the disc can cause broken or intermittent sound and also
noise.
—
When holding the discs, take care not to touch the playing surface.
—
Store the discs in their cases. Return them to their cases with the
label surface facing up and push down lightly on the label surface.
—
Do not place discs near a heating device, in a place where the
temperature is high or in dusty areas.
—
Do not write on the label surface using a ballpoint pen and do not
stick labels on the CD.
—
Wipe away any fingerprint or dust on the playing surface of a disc
using a soft cloth.
Bear in mind the following points:
—
Always wipe from the inside toward the outside of the disc.
—
Never in a circular motion.
—
Do not use conventional record cleaners, anti-static agents,
petroleum based products, thinner or other solvents.
1. Press the POWER button to turn on the player.
2. Press the CD button or repeatedly press the FUNCTION button on the remote control until "CD" is
shown in the display.
3. Press the CD OPEN/CLOSE button to open the CD tray.
4. Place a CD into one of the empty CD trays. Place another into the other empty CD tray.
5. Press one of the DISC buttons until the trays rotate and then insert a third disc into the empty tray.
6. Press the CD OPEN/CLOSE BUTTON to close the CD tray.
7. The set will search the trays automatically, if a disc is found in one of the trays, playback will
commence from the beginning of that track.
8. Press CD PLAY/PAUSE BUTTON again to pause playback.
9. To resume playback, press the CD PLAY/PAUSE button once again.
10. To Stop play back press the CD STOP button.
NOTE: This unit will play CD, CD-R, MP3-CD and WMA CD.
TRACK SKIP
TO SKIP TO THE NEXT TRACK ON A DISC.
1. Press the SKIP/TUNING UP button once.
The CD player will skip ahead to the next track each time the SKIP/TUNING UP button is press.
Repeatedly pressing the SKIP/TUNING UP button to skip ahead through the disc track by track. Once
the last track on the disc is reached the next disc will be selected.
TO SKIP BACK TO THE PREVIOUS TRACK ON A DISC.
Press the SKIP/TUNING DOWN button. If this button is pressed once when in the middle of a track,
the CD player will skip back to the beginning of that track, to skip back to the previous track press the
button again.
The CD player will skip back to the previous track each time the SKIP/TUNING DOWN button is
pressed. Repeatedly press the SKIP/TUNING DOWN button to skip back through the disc track by
track. Once the first track on the disc is reached the previous disc will be selected.

HANDLING COMPACT DISCS

CD PLAYBACK

- 9 -