Viessmann VITODENS 200-W Service Instructions Manual page 63

Scanning operating conditions and sensors
The following operating conditions can be scanned, subject to the actual sys-
tem equipment level:
Display screen Explanation
1 15 °C/°F Actual outside temperature
3 65 °C/°F Actual boiler water temperature
5 50 °C/°F Actual cylinder temperature (if a cylinder temperature sensor is
installed)
45 °C/°F Solar - actual DHW temperature
5□
6 70 °C/°F Actual collector temperature
Burner hours run (after a service, reset with e to "0")
P
263572 h
Burner starts (after a service, reset with e to "0")
PPP
030529
Solar circuit pump hours run
PPPPP
001417 h
Solar energy in kWh
PPPPPP
002850
Service scans
(cont.)
63