Product Icons - GE LOGIQ V5 Service Manual

GE
D 5496012-100, R
IRECTION
1-2-3

Product Icons

The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-6
LABEL/SYMBOL
Label/Icon
Identification and Rating Plate
Type/Class Label
IP Code (IPX8)
IPX8: FSU-1000, MKF 2-MED GP26
3
EVISION
Product Icons
• Manufacture's name and address
• Date of manufacture
• Model and serial numbers
• Electrical ratings (Volts, Amps, phase, and frequency)
Used to indicate the degree of safety or protection.
Indicates the degree of protection provided by the
enclosure per IEC60 529.
Type BF Applied Part (man in the box) symbol is in
accordance with IEC 60878-02-03.
General Warning
"CAUTION" - Dangerous voltage" (the lightning flash
with arrowhead) is used to indicate electric shock
hazards.
Indicates the power on and power off position of the
power switch.
CAUTION: This Power Switch DOES NOT ISOLATE
Mains Supply.
"Protective Earth" indicates the protective earth
(grounding) terminal.
This symbol indicates that waste electrical and
electronic equipment must not be disposed of as
unsorted municipal waste and must be collected
separately. Please contact an authorized representative
of the manufacturer for information concerning the
decommissioning of your equipment.
Section 1-2 - Important Conventions
PURPOSE/MEANING
Purpose/Meaning
LOGIQ V5/LOGIQ V3
B S M
ASIC ERVICE ANUAL
LOCATION
Location
Refer to User manual for detailed
information.
Bottom of footswitch
Beside the probe connector
Various
Various
See the Console Overview section
for location information.
Inside Console
Bottom
1 - 7