Required And Optional Tools And Materials - SeeMeCNC DropLit Assembly Manual

1 – Required and Optional Tools And Materials
Before you begin assembly of your DropLit, please make sure you've got everything on the
following list of tools and additional materials.
P1 & P2 sized Phillips screwdrivers
•
Small flat tip jeweler's screwdriver
•
Standard flat head screwdriver
•
5/32" Allen Wrench
•
5/16" Wrench
•
3/8" Wrench
•
Wire strippers
•
Wire cutters
•
Battery powered screwdriver. If you ever needed an excuse to buy one of these, THIS IS IT.
•
Soldering Iron
•
Thin Super Glue.
•
Waxed lacing cord. This is optional, but you can use this in place of wire ties in pretty much
•
any application. You can find it here: http://www.skygeek.com/wht-string.html. While
expensive, you'll never really need to buy a wire tie again and it'll likely last you the rest of your
life. :)
Q-Tips
•
DropLit Assembly Guide
5