Changed Parameters; How To View And Edit Changed Parameters - ABB ACS850 User Manual

Changed Parameters

In the Changed Parameters mode, you can:
• view a list of all parameters that have been changed from the macro default
values
• change these parameters
• start, stop, change the direction and switch between local and remote control.

How to view and edit changed parameters

Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Changed Parameters mode by selecting CHANGED PAR on the
menu with keys
• If there are no changed parameters in the history, corresponding text will be
shown.
• If parameters have been changed, a list of them is shown. Select the changed
parameter on the list with keys
parameter is shown below it.
EDIT
3. Press to modify the value.
4. Specify a new value for the parameter with keys
Pressing the key once increments or decrements the value. Holding the key
down changes the value faster. Pressing the keys simultaneously replaces the
displayed value with the default value.
5. • To accept the new value, press
parameter is removed from the list of changed parameters.
• To cancel the new value and keep the original, press
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
and , and pressing
and
SAVE
. If the new value is the default value, the
ENTER
.
. The value of the selected
and .
CANCEL
.
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00 ENTER
LOC MESSAGE
No parameters
00:00
LOC CHANGED PAR
9906 Mot nom current
3.5 A
9907 Mot nom voltage
9908 Mot nom freq
9909 Mot nom speed
EXIT 00:00 EDIT
LOC PAR EDIT
9906 Mot nom current
3.5
A
CANCEL 00:00 SAVE
LOC PAR EDIT
9906 Mot nom current
3.0
A
CANCEL 00:00 SAVE
LOC
CHANGED PAR
9906 Mot nom current
3.0 A
9907 Mot nom voltage
9908 Mot nom freq
9909 Mot nom speed
EXIT 00:00 EDIT
Operation
29
1