How To Change The Value Of Value Pointer Parameters - ABB ACS850 User Manual

How to change the value of value pointer parameters

In addition to the parameters shown above, there are two kinds of pointer
parameters; value pointer parameters and bit pointer parameters. The value pointer
parameter points to the value of another parameter/signal. The source parameter is
given in format P.xx.yy, where xx = Parameter group; yy = parameter index.
For more information, see appropriate Firmware Manual.
Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys and
3. Select the appropriate parameter group with keys
value pointer parameter 21.01 SPEED REF1 SEL is used as an example.
SEL
4. Press to select the appropriate parameter group. Select the appropriate
parameter with keys
shown below it.
EDIT
5. Press . Current value of the value pointer parameter is shown, as well as
the parameter it points to.
6. Specify a new value with keys
pointer parameter points to changes respectively.
7. • To save the new value for the pointer parameter, press
• To cancel the new value and keep the original, press
The new value is shown in the parameters list.
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing .
and , current value of each parameter is
and
and . Here the
. The parameter the value
SEL
.
CANCEL
.
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00 ENTER
LOC PAR GROUPS
01 Actual values
02 I/O values
03 Control values
04 Appl values
06 Drive status
EXIT 00:00 SEL
LOC PAR GROUPS
15 Analogue outputs
16 System
19 Signal conditions
20 Limits
21 Speed ref
EXIT 00:00 SEL
LOC
PARAMETERS
2101 Speed ref1 sel
AI1 scaled
2102 Speed ref2 sel
2103 Speed ref1 func
2104 Speed ref1/2 sel
EXIT 00:00 EDIT
LOC PAR EDIT
2101 Speed ref1 sel
AI1 scaled
[P.02.05]
CANCEL 00:00 SEL
LOC
PAR EDIT
2101 Speed ref1 sel
FBA ref1
[P.02.26]
CANCEL 00:00 SEL
LOC PARAMETERS
2101 Speed ref1 sel
FBA ref1
2102 Speed ref2 sel
2103 Speed ref1 func
2104 Speed ref1/2 sel
EXIT 00:00 EDIT
Operation
23
1
01
21