How To Change The Value Of Bit Pointer Parameter To Fixed 0 (False) Or 1 (True) - ABB ACS850 User Manual

26

How to change the value of bit pointer parameter to fixed 0 (FALSE) or 1 (TRUE)

The bit pointer parameter can be fixed to constant value of 0 (FALSE) or 1 (TRUE).
When adjusting a bit pointer parameter on the control panel, CONST is selected in
order to fix the value to 0 (displayed as C.FALSE) or 1 (C.TRUE).
For more information, see appropriate Firmware Manual.
Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys and
Select the appropriate parameter group with keys
bit pointer parameter 14.07 DI02 OUT SRC is used as an example.
SEL
3. Press to select the appropriate parameter group. Select the appropriate
parameter with keys
shown below its name.
EDIT
4. Press .
Select CONST with keys
NEXT
5. Press .
6. Specify a new constant value (TRUE or FALSE) for the bit pointer parameter
with keys
Operation
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing
and . Current value of each parameter is
and
and .
.
and . Here the
.
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00 ENTER
LOC
PAR GROUPS
01 Actual values
02 I/O values
03 Control values
04 Appl values
06 Drive status
EXIT 00:00 SEL
LOC PAR GROUPS
10 Start/stop/dir
11 Start/stop mode
12 Operating mode
13 Analogue inputs
14 Digital I/O
EXIT SEL
00:00
LOC PARAMETERS
1401 DI01 Ton9901
1405 DI01 Toff
1406 DI02 conf
1407 DI02 out src
P.06.02.03
EXIT 00:00 EDIT
LOC
PAR EDIT
1407 DI02 out src
Pointer
CANCEL 00:00 NEXT
LOC
PAR EDIT
1407 DI02 out src
Const
CANCEL 00:00 NEXT
LOC
PAR EDIT
1407 DI02 out src
C.FALSE
[0]
CANCEL 00:00 SAVE
LOC PAR EDIT
1407 DI02 out src
C.TRUE
[1]
CANCEL 00:00 SAVE
1
01
14