How To Select The Monitored Signals - ABB ACS850 User Manual

Step Action
7. • To continue, press
• To cancel the new value and keep the original, press
The new value is shown in the parameters list.

How to select the monitored signals

Step Action
1. You can select which signals are monitored in the Output mode and how they
are displayed with group 56 PANEL DISPLAY parameters. See page
detailed instructions on changing parameter values.
Note: If you set one of the parameters 56.01...56.03 to zero, in the output mode
you can see names for two remaining signals. The names are also shown, if
you set one of the mode parameters 56.04...56.06 to Disabled.
SAVE
.
CANCEL
.
21 for
Display
LOC PARAMETERS
1407 DI02 out src
C.TRUE
1408 DI02 Ton
1409 DI02 Toff
1410 DI03 conf
EXIT 00:00 EDIT
Display
LOC PAR EDIT
5601 Signal1 param
01.03
CANCEL 00:00 NEXT
LOC
PAR EDIT
5602 Signal2 param
01.04
CANCEL 00:00 NEXT
LOC PAR EDIT
5603 Signal3 param
01.06
CANCEL 00:00 NEXT
Operation
27