List Of Tasks - ABB ACS850 User Manual

16
Initially, the panel is in the Output mode, where you can
start, stop, change the direction, switch between local and
remote control, modify the reference value and monitor up
to three actual values. To do other tasks, go first to the
Main menu and select the appropriate option on the
menu. The status line (see section
shows the name of the current menu, mode, item or state.

List of tasks

The table below lists common tasks, the mode in which you can perform them,
abbreviations of the options in the Main menu and the page number where the steps
to do the task are described in detail.
Task
How to get help
How to find out the panel version
How to start and stop the drive
How to switch between local and remote control
How to change the direction of the motor rotation
How to set the speed, frequency, torque or position reference in
the Output mode
How to adjust the display contrast
How to change the value of a parameter
How to change the value of value pointer parameters
How to change the value of bit pointer parameter to point to the
value of a bit in another signal
How to change the value of bit pointer parameter to fixed
0 (FALSE) or 1 (TRUE)
How to select the monitored signals
How to do guided tasks (specification of related parameter sets)
with assistants
How to view and edit changed parameters
How to view faults
How to reset faults and alarms
How to show/hide the clock, change date and time formats, set
the clock and enable/disable automatic clock transitions
according to the daylight saving changes
How to copy parameters from the drive to the control panel
How to restore parameters from the control panel to the drive
How to view backup information
How to edit and change parameter settings related to I/O
terminals
How to edit reference value
How to view drive info
How to view and edit recently changed parameters
* Main menu options actually shown in the control panel.
Operation
Status line on page 11)
Mode / Main menu
option
Any
Any
Output
Any
Any
Output
Output
Parameters
Parameters
Parameters
Parameters
Parameters
Assistants
Changed Parameters
Fault Logger
Fault Logger
Time & Date
Parameter Backup
Parameter Backup
Parameter Backup
I/O Settings
Reference Edit
Drive Info
Parameter Change Log PAR CHG LOG
30.00rpm
LOC
49. 10
Hz
0. 50
A
10. 7
%
DIR 00:00 MENU
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00 ENTER
Abbreviations of the Page
Main menu options *
-
-
-
-
-
-
-
PARAMETERS
PARAMETERS
PARAMETERS
PARAMETERS
PARAMETERS
ASSISTANTS
CHANGED PAR
FAULT LOGGER
FAULT LOGGER
TIME & DATE
PAR BACKUP
PAR BACKUP
PAR BACKUP
I/O SETTINGS
REF EDIT
DRIVE INFO
1
17
17
18
18
19
20
20
21
23
24
26
27
28
29
30
31
32
35
35
41
42
44
45
46