Emerson CSI 9420 Reference Manual page 2

Read this manual before working with the product. For personal and system safety, and for optimum product performance, make
sure to thoroughly understand the contents before installing, using, or maintaining this product.
If you need product support, contact:
Global Service Center (GSC)
Phone: 1-800-833-8314
1-877-812-4036
Email: mhm.custserv@emerson.com
Web: http://www.assetweb.com/mhm
World Wide Customer Service
Phone: 1-888-367-3774 (Option 2 CSI)
wwcs.custserv@emerson.com
Email:
CAUTION!
The product described in this document are NOT designed for nuclear-qualified applications.
Using a non-nuclear qualified product in applications that require nuclear-qualified hardware or products may cause inaccurate
readings.
The CSI 9420 Wireless Vibration Transmitter may be protected by one or more U.S. Patents pending. Other foreign patents
pending.
WARNING!
Explosions could result in death or serious injury:
• Installation of this transmitter in an explosive environment must be in accordance with the appropriate local, national, and
international standards, codes, and practices. Please review the approvals section of this document for any restrictions associated
with a safe installation.
• Before connecting a Field Communicator in an explosive atmosphere, ensure the instruments are installed in accordance with
applicable field wiring practices.
Electrical shock can result in death or serious injury. Avoid contact with the leads and terminals. High voltage that may be present on
leads can cause electrical shock.
CE Notice
Emerson Process Management products bearing the symbol on the product or in the user's manual are in compliance with
applicable EMC and Safety Directives of the European Union. In accordance with CENELEC standard EN 50082-2, normal intended
operation is specified as follows: 1. The product must not pose a safety hazard. 2. The product must not sustain damage as a result
of use under environmental conditions specified in the user documentation. 3. The product must stay in or default to an operating
mode that is restorable by the user. 4. The product must not lose program memory, user-configured memory (e.g., routes), or
previously stored data memory. When apparent, the user may need to initiate a reset and/or restart of a data acquisition in
progress. A Declaration of Conformity certificate for the product is on file at the appropriate Emerson Process Management office
within the European Community.
and select Product Support