FRANCO BELGE 174 05 05 Technical Manual
  1. Manuals
  2. Brands
  3. FRANCO BELGE Manuals
  4. Stove
  5. 174 05 05
  6. Technical manual
FRANCO BELGE 174 05 05 Technical Manual

FRANCO BELGE 174 05 05 Technical Manual

Oil fired stove
Hide thumbs
Table of Contents

Advertisement

Quick Links

Belfort
Document n° 979-3 EN ~ 28/08/2000
English
Oil fired stove
Norsk
Model : 174 05 05
(EN 1)
CAN/CSA approved / ANSI/UL approved
Technical manual
to be saved
by the user
for future reference
Description of the appliance
Installation instructions
Operating instructions
Les Fonderies Franco-Belges
59660 MERVILLE
Spare parts
Phone : 03.28.43.43.43
Fax : 03.28.43.43.99
RC Hazebrouck 445750565B
Subject to modifications

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 174 05 05 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FRANCO BELGE 174 05 05

Summary of Contents for FRANCO BELGE 174 05 05

  • Page 1 Belfort Document n° 979-3 EN ~ 28/08/2000 English Oil fired stove Norsk Model : 174 05 05 (EN 1) CAN/CSA approved / ANSI/UL approved Technical manual to be saved by the user for future reference Description of the appliance Installation instructions...

  • Page 2: Table Of Contents

    FRANCO BELGE, which has been granted the ISO 9001 certification, guarantees the quality of its appliances and is committed to meet its customers’ needs. FRANCO BELGE, which can boast a 75-year experience in the industry of heating devices, uses state-of-the-art technologies to design and manufacture its whole range of products.

  • Page 3: Description Of The Unit

    Oil fired stove BELFORT 174 05 05 1. Description of the unit Package 1.1. 200 mm ¤ 1 package. The stove is supplied completely assembled except the four levelling feet that are placed on the burner. Optional equipment 1.2. ¤ Ground vat ¤...

  • Page 4: Installation Instructions

    174 05 05 BELFORT Oil fired stove 1.4. Description Flued oil stove with vaporizing burner (Norm EN 1). 1.5. Operating principle Furnace oil is fed to the burner floor (fig. 3) where is it ignited by means of a firestarter (or the Glow-plug ignitor # 6).

  • Page 5: Mounting The Levelling Feet

    Oil fired stove BELFORT 174 05 05 Figure 6 - Back panel Figure 5 - Top flue outlet 1 - Flue collar 3 - Screws, washers and bolts 2 - Sealing rope - Minimum flue diameter, 10 cm (4" I.D).

  • Page 6: External Tank

    174 05 05 BELFORT Oil fired stove Figure 9 - Fitting the tray pipe may be utilized being careful to maintain clearances to any combustible surface. Once the stove has been properly installed the chimney Figure 11 - Gravity or pumped oil supply draught must be checked with a draught meter.

  • Page 7: Oil Flow Adjustment

    Oil fired stove BELFORT 174 05 05 2.11. Oil flow adjustment The float regulator has been adjusted at the factory and should not need further adjustment. If the burner does not work correctly, check possible causes before readjusting the settings :...

  • Page 8: Operating Instructions

    174 05 05 BELFORT Oil fired stove 3. Operating instructions 3.1. Fuel Warning : Your stove is fitted with a specific float regulator for a specific oil. ¤ Kerosene 28 sec. (1,8 cst at 25°C) The fuel oil must be free from any dirt and water which could disturb the stove in operation.

  • Page 9: Recommendation

    Oil fired stove BELFORT 174 05 05 3.6. Recommendation - remove the filter cover plate located under the float regulator (# 3, fig. 15) with a screwdriver, - remove the tubular filter from the float regulator. Clean The adjustment of the stove has been made at the it with oil using a soft brush, never a wire-brush, factory and checked by your installer.

  • Page 10: Trouble Shooting

    174 05 05 BELFORT Oil fired stove 3.7. Trouble shooting þ : This sign means that you should asked for a qualified engineer to do the work. PROBLEM TEST SOLUTION SYMPTOM ¤ Very cold chimney. No draught - Leave door ajar until fire has caught.

  • Page 11: Spare Parts

    When ordering spare parts, please indicate : model n°, colour code, description of the part, code of the part. K = 174 05 05 K C = 174 05 05 C Example : Stove 174 05 05 , base 352155 EF N° Code Description .
  • Page 12 174 05 05 BELFORT Oil fired stove " " "  & # " ! " " # " ! " $ " & " % &  " " ' " $ " & # & "  ! &...
  • Page 13 Oil fired stove BELFORT 174 05 05 327802 Clamp ......Y ..J ..K ..C ..01 327902 MJ Ash-tray .
  • Page 14 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Date of installation : __ __ / __ __ /__ __ __ __ q 174 05 05 Model of the appliance : Color :...

Table of Contents

Save PDF