1. When you remove the panel, turn the transceiver up side
down. Detach the panel by lifting the tabs as shown be-
low.
Tabs
Fig. 1
2. To remove the cabinet, first turn the transceiver up side
down. Detach the cabinet by prying the tabs as shown
below.
Tabs
Fig. 2
3. To remove the display unit PCB, detach the PCB by lifting
at the indents of the PCB as shown below.
Fig. 3
DISASSEMBLY FOR REPAIR
Tabs
Indents
4. Mount the display unit
To mount the display unit on the panel, follow the correct
procedures shown to ensure easy display unit assembly
and good fitting onto the panel.
q Snap in bottom of display unit first.
w Snap in top of displaly unit.
w
Fig. 4
5. When mounting the front panel, match the 4 tabs of the
chassis with the panel, being sure they attach securely.
Tabs
Fig. 5
TK-8102
q
Tabs
15