Kenwood TK-8102 Service Manual page 11

10. Connect the KCT-39 to the external accessory by insert-
ing the crimp terminal (
1
of which are supplied with the KCT-39.
13
15
1
2
3
1
Fig. 3
■ Accessory Port Function
13 10 7 4 1
14 11 8 5 2
15 12 9 6 3
REALIGNMENT
) into the square plug ( ), both
2
No. Color Internal Name
connector
1 Red CN2-1 SB
2 Pink CN3-1 IGN
3 Black CN2-3 GND
4 Brown CN3-3 DETO
5 Orange CN3-2 DATAI
6 Yellow CN2-8 FNC4
7 Green CN2-7 FNC3
8 Blue CN2-9 FNC5
9 Purple CN2-12 FNC8
10 Gray CN2-10 FNC6
11 White CN2-11 FNC7
12 NC NC
13 NC NC
14 Sky blue CN2-6 FNC2
15 Turquoise CN2-5 FNC1
6. Ignition Sense Cable (KCT-18)
The KCT-18 is an optional cable for enabling the ignition
function. The ignition function lets you turn the power to the
transceiver on and off with the car ignition key.
6-2. Connecting the KCT-18 to the Transceiver
1. Install the KCT-39 in the transceiver. (See the KCT-39 sec-
tion)
2. Insert the KCT-18 lead terminal (
39 ( ).
2
13 2
1
15
3
1
Fig. 7
6-3. Modifying the Transceiver
Modify the transceiver as follows to turn the power on and
off with the ignition key.
1. Remove the resistor R71 of the TX-RX unit.
■ Setting With the KPG-70D
Select "External Devices" from the "Edit" menu and en-
able the "Ignition Sense".
Fig. 8
TK-8102
1 ) into pin 2 of the KCT-
TX-RX unit
Component side
11