Kenwood TK-8102 Service Manual page 14

TK-8102
7. Adhere the 10 x 10 x 2.5 mm cushion E (G13-2007 -04)
and the supplied 20 x 20 x 1mm cushion C to the under-
side of the ST-865KW4 as shown in the diagram below.
Cushion C
Note :
• For the SmarTrunk option, cushion C and the insulation
sheet are included in the package.
• For TK-7102 & TK-8102 series, cushion A is not used.
Cushion A is replaced by cushion F.
• Cushion B is replaced by cushion E.
14
INSTALLATION
Insulation sheet
Cushion E
Part No. : G13-2007-04
8. Align the connector on the underside of the ST-865KW4
with the connector on the top side of the ST-909, then
press down on cushion E to secure them.
ST-909 ST-865KW4
9. Flatten the cable so as to avoid potential damage when
mounting the shielding cover. Mount the shielding cover
and secure it with the five M2.6 screws.
Note :
• ST-909 and ST-865KW4 are available from SmarTrunk
Systems,Inc.
■ Setting With the KPG-70D
Select "External Devices" from the "Edit" menu and set
the "SmarTrunk".
Cushion E
Screw hole