Table of Contents
Advertisement
AP Plenum Requirements
1. Before using this equipment, make sure that no premises radio stations or
2. If this equipment causes RF interference to a premises radio station of RF-ID,
3. If this equipment causes RF interference to a specified low-power radio station
Industry Canada
Canadian Compliance Statement
Access Point Models
AP832e
AP832i
This Class B Digital apparatus meets all the requirements of the Canadian Interfer-
ence-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le
material broilleur du Canada.
This device complies with Class B Limits of Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
Meru Access Points are certified to the requirements of RSS-210. The use of this
device in a system operating either partially or completely outdoors may require the
user to obtain a license for the system according to the Canadian regulations. For
further information, contact your local Industry Canada office.
This device has been designed to operate with antennas having a maximum gain of 7
dBi. Antennas having a gain greater than 7 dBi are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than that permitted for successful communication.
xlviii Meru Access Point Installation Guide
specified low-power radio stations of RF-ID are used in the vicinity.
promptly change the frequency or stop using the device; contact the number
below and ask for recommendations on avoiding radio interference, such as
setting partitions.
of RF-ID
may cause undesired operation.
Certification Number
© 2013 Meru Networks, Inc.
Hide quick links:
Advertisement
Table of Contents
