Canada. Industry Canada (Ic) - Meru Networks AP1014i Installation Manual

Canada. Industry Canada (IC)

RF exposure related statements
The Class B digital portion of this apparatus complies with Canadian standard ICES-
RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment.
003.
Déclarations d'exposition aux RF liées
Avertissement d'exposition RF: L'équipement est conforme aux limites d'exposition aux RF établies pour un These devices comply with RSS210 of Industry Canada.
environnement non contrôlé.
Per RSS 210 A9.5 point 7:
This device complies with Industry Candada licence-exempt RSS standard(s).
for harmful interference to co-channel mobile satellite systems;
Operation is subject to the following two conditions:
(ii) the maximum antenna gain permitted (for devices in the bands 5250-5350 MHz
(1) This device may not cause harmful interference, and
and 5470-5725 MHz) to comply with the e.i.r.p. limit; and
(2) this device must accept any interference received, including interference that may cause undesired
(iii) the maximum antenna gain permitted (for devices in the band 5725-5825 MHz)
to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point
operation of the device.
operation as appropriate, as stated in section A9.2(3).
Ce dispositif est conforme à la norme de l'industrie Candada exempts de licence RSS (s).
In addition, users should also be cautioned to take note that high-power radars are
L'opération est soumise aux deux conditions suivantes:
allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz
(1) Cet appareil ne peut causer d'interférences nuisibles, et
and 5650-5850 MHz and these radars could cause interference and/or damage to LE-
(2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un mauvais
LAN devices.
fonctionnement de l'appareil.
(iv) These devices are not permitted to operate in the 5600 - 5650 MHz band.
This equipment complies with Candada radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
For products available in the USA and Canadian markets, only channels 1 through 11
centimeters between the radiator and your body. can be operated. Selection of other channels is not authorized.
Cet équipement est conforme aux limites Candada exposition aux radiations établies pour un
Operation is subject to the following two conditions: (1) this device may not cause
incontrôlés environnement. Cet équipement doit être installé et utilisé avec une distance minimale
interference, and (2) this device must accept any interference, including interfer-
de 20 centimètres entre le radiateur et votre corps.
ence that may cause undesired operation of this device.
This device and its listed antenna(s) must not be co-located or operated in conjunc-
tion with any other antenna or transmitter
L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il
ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit étre prêt à
accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.
The term "IC" before the equipment certification number only signifies that the
Industry Canada technical specifications were met.
To reduce the potential radio interference to other users, the antenna type and gain
should be chosen so that the equivalent isotropically radiated power (EIRP) is not
more than that required for successful communication.
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment
(or its transmit antenna) that is installed outdoors is subject to licensing.
Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une
licence, il doit etre utilze a l'interieur et devrait etre place lin des fenetres afin de
Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est
installe a l'exterieur, il doit faire l'objet d'une licence.
© 2011 Meru Networks, Inc.
Canada. Industry Canada (IC)
Regulatory Information 13