Manufacturing Information; Ap Plenum Requirements - Meru Networks AP832 Installation Manual

Model AP150
003NY06122 0000
Singapore
For the AP201 Rev 2, AP208 Rev 2, and OAP180, the following approval information applies:
For the AP300 series, the following approval information applies:

Manufacturing Information

The AP1000 and AP300 are built in Taiwan. Factory information is provided under NDA and
upon request.

AP Plenum Requirements

When installing APs in an air-handling space, as described in Article 300.22(C) of the
NEC (2005), the unit should only be powered by the Ethernet port (PoE), not by the
AC-powered power supply.
When the product is installed in air-handling spaces, the cables employed should be
suitable under NEC Articles 300.22 and 725 and marked accordingly, for use in
plenums and air-handling spaces with regard to smoke propagation, such as CL2-P,
CL3-P, MPP or CMP.
© 2013 Meru Networks, Inc.
003GZ06030 0000
Complies with
IDA Standards
DA103798
Complies with
IDA Standards
DB102245
Manufacturing Information
003WY06046 0000
Regulatory Information xlv