This Device Meets The Industry Canada Guidelines For Exposure To Radio Waves; Maximum Eirp; Dual Concurrent Same Band Operation - Meru Networks AP832 Installation Manual

The FCC recommends that if you are interested in further reducing your exposure
then you can easily do so by reorienting antennas away from the user or placing the
antennas at a greater separation distance then recommended or lowering the trans-
mitter power output.
This Device Meets the Industry Canada Guidelines for Exposure to
Radio Waves
The AP832e and AP832i include radio transmitters and receivers. It is designed not
to exceed the limits for exposure to radio waves (radio frequency electromagnetic
fields) as referenced in Health Canada Safety Code 6. The guidelines include a
substantial safety margin designed into the limit to ensure the safety of all persons,
regardless of age and health.
As such the systems are designed to be operated as to avoid contact with the
antennas by the end user. It is recommended to set the system in a location where
the antennas can remain at least a minimum distance as specified from the user in
accordance to the regulatory guidelines which are designed to reduce the overall
exposure of the user or operator.
Health Canada states that present scientific information does not indicate the need
for any special precautions for the use of wireless devices. They recommend that if
you are interested in further reducing your exposure you can easily do so by reori-
enting antennas away from the user, placing the antennas at a greater separation
distance than recommended, or lowering the transmitter power output.

Maximum EIRP

The transmit EIRP is the sum of the transmit power and the antenna gain. By default,
the EIRP is set lower than the regulator limit with the default rubber duct antenna.
For any higher gain antennas, transmit power is reduced via the CLI to keep the EIRP
below the regulatory limit.

Dual Concurrent Same Band Operation

When both AP radios are operating on the same band simultaneously, their transmit
power is reduced by 3 dBm.
© 2013 Meru Networks, Inc.
MPE
0.63 mW/cm2
Separation Distance
Distance
20 cm (7.87 inches)
AP Plenum Requirements
Limit
1.00 mW/cm2
Regulatory Information li