Installing Ap832I - Meru Networks AP832 Installation Manual

AP832i is supported by System Director versions 5.3 and greater. This chapter describes how to install
and configure an AP832i. It contains the following sections:
Safety Precautions

Unpack the AP832i


Installing AP832i


Check AP832i LED Activity

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
If an optional power supply is used, it must be one supplied by Meru Networks.
Warning!
The AP832i is only intended for installation in Environment A as defined in IEEE 802.3af. All intercon-
nected equipment must be contained within the same building, including the interconnected equip-
ment's associated LAN connection.
© 2013 Meru Networks, Inc.
This product is intended to be supplied by a UL Listed power supply
marked Class 2 or LPS and rated minimum 12Vdc, 2A. For Power over
Ethernet, an 802.3af or 802.3at connection must be used.
Safety Precautions
Chapter 3
Installing AP832i
Installing AP832i xvii