Sfp+ Direct Attach Copper Cables For Ex Series Switches; Cable Specifications; Figure 41: Sfp+ Direct Attach Copper Cables For Ex Series Switches; Table 55: Software Support For Sfp+ Passive Direct Attach Copper Cables For Ex Series Switches - Juniper EX9208 Hardware Manual

Hardware guide
Hide thumbs Also See for EX9208:
Table of Contents

Advertisement

Related
Documentation

SFP+ Direct Attach Copper Cables for EX Series Switches

Cable Specifications

Table 55: Software Support for SFP+ Passive Direct Attach Copper Cables for EX Series Switches

Switch
Software Support Added
EX2300 switches
Junos OS Release 15.1X53-D50
EX3200 switches
Junos OS Release 10.3
Copyright © 2017, Juniper Networks, Inc.
For the list and specifications of transceivers supported on EX6200 switches, see
Pluggable Transceivers Supported on EX6200 Switches.
For the list and specifications of transceivers supported on EX8200 switches, see
Pluggable Transceivers Supported on EX8200 Switches.
For the list and specifications of transceivers supported on EX9200 switches, see
"Pluggable Transceivers Supported on EX9200 Switches" on page
Installing a Transceiver in a Switch on page 255
Removing a Transceiver from a Switch on page 257
Connecting a Fiber-Optic Cable to a Switch on page 195
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables,
also known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 23 ft (7 m), making them ideal
for highly cost-effective networking connectivity within a rack and between adjacent
racks. See
Figure 41 on page

Figure 41: SFP+ Direct Attach Copper Cables for EX Series Switches

This topic describes:
Cable Specifications on page 133
Standards Supported by These Cables on page 138
EX Series switches support SFP+ passive DAC cables. The passive Twinax cable is a
straight cable with no active electronic components. EX Series switches support 1 m,
3 m, 5 m, and 7 m long SFP+ passive DAC cables. For the full specifications of these
cables, see
The Hardware Compatibility Tool
Table 55 on page 133
describes the support for SFP+ passive DAC cable lengths on
EX Series switches for Junos OS releases.
Chapter 8: Transceiver and Cable Specifications
133.
.
Cable Length
3 ft (1 m), 10 ft (3 m), and 16 ft (5 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
103.
133

Advertisement

Table of Contents
loading

Table of Contents