Figure 39: Ac Plug Types - Juniper EX9208 Hardware Manual

Hardware guide

Hide thumbs Also See for EX9208:

Table of Contents

Chapter 7: Planning Power Requirements

Figure 39: AC Plug Types

The AC power cord for the switch is intended for use with the

switch only and not for any other use.

Translation from Japanese: The attached power cable is only for this product.

Do not use the cable for another product.

In North America, AC power cords must not exceed 4.5 m

(approximately 14.75 ft) in length, to comply with National Electrical Code

(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical

Code (CEC) Section 4-010(3). You can order AC power cords that are in