FX Configurator-FP
Operation Manual
4.
Creating files
FX Configurator-FP sets and controls the data in the table below.
Data
Positioning
parameter
Table information
Servo parameter
Caution
When creating and saving-as files, the characters and symbols below are not available for the file paths and
names.
/ , : ; * " < > | \ COM LPT AUX CON PRN NUL CLOCK
30
Parameters for positioning operations, i.e. pulse rate, feed rate and maximum speed of
20SSC-H
Setting data for table operations of X/Y/XY-axis
Data to be transferred from 20SSC-H to servo amplifiers, including servo amplifier series, gain/
filter, expansion, I/O, basic setting parameters.
Description
4 Creating files