Amped Wireless ALLY User Manual page 98

I wish to use the ALLY Router without the ALLY app. How do I do this?
a) If you have never set the ALLY Router up using the ALLY app follow these steps: Power on the ALLY
Router and connect to the ALLY's Wi-Fi network. Open a web browser and go to:
http://setup.ampedwireless.com
steps to configure your ALLY Router.
b) If you have previously configured the ALLY Router using the ALLY app and you wish to no longer use
the ALLY app with the Router follow these steps. While the ALLY Router is powered on, reset the ALLY
Router by pressing the Reset button on the bottom of the Router for 10 seconds. The status light
should blink rapidly when the Router has been reset. Once this is done, follow the steps in "a" to
configure the Router using the web menu.
I entered setup.ampedwireless.com and it failed to open the Setup Wizard.
a) Make sure your computer is connected to the Router using the included Ethernet cable. Do not try to
connect with a wireless connection. Ensure that the power on the Router is on.
b) Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi
connection and disconnect from all wireless networks. Reboot the router and try again.
c) Close your current web browser and reopen it. Use Google Chrome or Internet Explorer (v8.0 and up).
d) Open your web browser and enter 192.168.3.1 into the web address bar.
to access the web menu and web based setup wizard. Follow the
97