Amped Wireless ALLY User Manual page 106

d) Place the ALLY Router in a higher location near the center of your desired coverage location.
My wireless adapter does not connect at the maximum wireless speed.
a) Your wireless network adapter may be outdated and have older wireless technology not capable of
achieving the wireless network speeds of the Router. To achieve maximum wireless speeds, it is
required that you have an 802.11n (2.4GHz) or 802.11ac (5.0GHz) adapter. To obtain a data rate of
1733Mbps on the 5GHz band or 800Mbps on the 2.4GHz band the network adapter used to connect to
the Router must support the same data rates.
b) Wireless speeds degrade as you get further away from the wireless router.
c) Check that the wireless channel set on the Router is not crowded. Try changing the wireless channel
to another channel and test the speed again.
d) Do not use Internet websites (i.e. speedtest.net or other websites) to test your wireless speeds. Speed
test websites measure your Internet connection speed, which is controlled by your Internet provider.
Wireless speeds are for your local network and not your Internet connection. To test wireless speeds,
a local test or file transfer will be required to test the true wireless speed.
105