Parts And Controls; Top Panel (Lid Open); Figure 1 Top Panel (Lid Open) - Fluke 9009 User Manual

5 Parts and Controls

Top Panel (Lid Open)

5 Parts and Controls
The user should become familiar with the dry-well calibrator and its parts.
5.1 Top Panel (Lid Open)

Figure 1 Top Panel (Lid Open)

Power Switch - The power switch is located on the power entry module
(PEM). The PEM also houses the fuse.
Power Cord - The removable power cord inlet plugs into an IEC grounded
socket on the PEM.
Insert Storage - Four inserts may be stored here.
Constant Temperature Block Assembly - Calibrate two sensors at once or use
one well for a reference thermometer. See Section 5.2 for additional details.
Fluke-Direct
13
.com
info@Fluke-Direct.com 1.888.475.5235