9009
User's Guide
Parts and Controls
This section describes the Product and its parts.
Top Panel (Lid Open)
See Table
1
for the top panel parts.
I
H
G
Number
Storage inside the lid for power cord and
A
insert removal tool.
Serial Port. A three-conductor jack to
interface the calibrator to a computer or
B
terminal with serial RS-232
communications.
4
Table 1. Top Panel
DUAL-WELL DRY-BLOCK CALIBRATOR –15°C to 350°C
9009
BEFORE CLOSING LID:
REMOVE ALL PROBES FROM
COOL TEMPERATURE WELLS DOWN BELOW 100°C (212°F).
RETURN INSERTS, POWER CORD, AND REMOVAL TOOL TO
THEIR STORAGE LOCATIONS.
Description
9009
TEMPERATURE WELLS.
Number
O-ring seal keeps Calibrator protected
and sealed from moisture during
F
transit.
Constant Temperature Block
Assemblies. Calibrate two sensors at
once or use one well for a reference
G
thermometer. See
Temperature Block
details.
A
B
C
D
E
F
Description
Constant
for additional