Safety Instructions - Agria farmstar 1600 Operating Instructions Manual

1. Safety Instructions

Before starting the machine, read the
operating instructions and note:
Warning
This symbol marks all paragraphs in
these operating instructions which affect
your safety. Pass all safety instructions
on to other users and operators.
Due Use
The power hoe is a hand-controlled
automatic single-axle machine. Pro-
pulsion is achieved using the hoe tools
approved by the manufacturer. The
power hoe is intended for use in turning
over the ground in landscape gardening
(including the leisure sector). The area
to be covered must be in line with the
usual size of such areas in landscape
gardening. (Due use)
Any other type of operation is
considered undue. The manufacturer is
not liable for any damages resulting from
undue use, for which the risk lies with
the user alone.
The power hoe is not intended for use
on such areas as vary stony or rocky
ground or as a tree-stump milling
machine.
Due use includes compliance with
manufacturer's
operation, maintenance and repair.
Any unauthorized changes to the power
hoe render manufacturer liability null and
void.
instructions on
agria Power Hoe Farmstar 1600
General Instructions on
Safety and Accident
Prevention
Basic Rule:
The respective national accident
prevention regulations have to be
adhered to, as well as all other generally
accepted rules governing operational
safety, occupational health and road
traffic regulations.
When driving on public roads, you have
to observe the current traffic code.
Accordingly, check the power hoe for
road and operational safety each time
you take up operation.
Only persons familiar with the machine
and instructed on the hazards of
operation are allowed to use, maintain
and repair the machine.
Teenagers younger than 16 years are
not allowed to operate the machine!
Only work in good light and visibility.
Operator's clothes should fit tight. Avoid
wearing loose fitting clothes. Wear solid
shoes.
Note the warning and instruction signs
on the machine for safe operation.
Compliance is for your own safety.
When transporting the machine on
vehicles or trailers outside the area to
be cultivated, ensure that the engine is
turned off.
Careful with rotating tools – keep at a
safe distance!
Beware of coasting tools. Before you
start any maintenance or repair on them,
wait until tools have come to a complete
stop.
1
9