Draining The Water Tank - Russell Hobbs RHI 102 Instruction And Warranty Book


Turn the Temperature Dial in a clockwise direction to the '●●●' setting.

The pilot light will turn on to indicate that the iron is switched on. When the
required temperature is reached, the pilot light will turn off.

Wait for the pilot light to turn on and off once more.

Turn the Temperature Dial in an anti-clockwise direction to the Min mark.

Disconnect the iron from the mains supply outlet.

Hold the iron horizontally over a sink.

Rotate and hold the Steam Control / Self Cleaning Knob to the descaling
position.
Please Note: Steam and boiling hot water will emit from the holes in the soleplate
washing away the scales and minerals deposited in the Steam Chamber. Keep
skin/body away from the steam and hot water.

Gently move the iron back and forth until the water tank is empty.

When the Self-Cleaning is complete, release the Steam Control / Self-Cleaning
Knob and return it to the no steam

Place the iron on a stable surface in an upright standing position and allow the
iron to cool down completely.

Wipe the soleplate with a cool, damp cloth.

DRAINING THE WATER TANK:


Draining the water tank after ironing can prolong the life of your iron as it reduces
the build-up of calcification and lime in the steam chamber.

Disconnect the iron from the mains supply outlet.

Turn the Steam Control / Self-Cleaning Knob to the
position.

Press the Burst of Steam and Spray buttons to release
any reserve water.

Hold the iron upside down and gently shake it to
remove the water remaining in the water tank.
Please Note: Set the Steam Control Knob to the
position.
position before storing the iron.
9