Spray Function; Steam Function - Russell Hobbs RHI 102 Instruction And Warranty Book

SPRAY FUNCTION:


This function can be used at any time and it does not affect the ironing
temperature.

Fill the iron as described in the HOW TO FILL
WITH WATER section.

Aim the nozzle at the garment.

Press the Spray Button.
Please Note: It may be necessary to press the spray button a few times to start this
function.

STEAM FUNCTION:


Fill the iron as described in the HOW TO FILL WITH WATER section.

Turn the Temperature Dial in a clockwise direction to the '●●●' setting.
Please Note: Do not use the '●' or '●●' setting for steam ironing.

When the pilot light turns off the required temperature has been reached and the
iron is ready for use.

Rotate the Steam Control / Self-Cleaning Knob backwards for more steam or
rotate it forwards for less steam. Alternatively, rotate the knob to the
for no steam.
BURST OF STEAM FUNCTION:

This function provides extra steam to remove stubborn
wrinkles.

Fill the iron as described in the HOW TO FILL WITH
WATER section.

Turn the Temperature Dial in a clockwise direction to
the '●●●' setting.

Press the Burst of Steam Button once.

Steam will penetrate into the garment to remove the wrinkles.

Wait a few seconds before pressing the Burst of Steam Button again.

Usually all wrinkles can be removed within three presses.
Please Note: It may be necessary to press the Burst of Steam Button a few times to
start this function.
7
position