How To Fill The Water Tank - Russell Hobbs RHI931 Instructions And Warranty

READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER'S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR TO THE
FOLLOWING:
Symbol
Wool
Cotton
Linen
Note: the symbol means:"This article cannot be ironed!"
NOTE: If the fabric consists of various kinds of fabrics, always select the temperature
required by the most delicate fabrics.

HOW TO FILL THE WATER TANK

1. Disconnect the appliance from main power supply outlet.
2. Ensure that the temperature dial and steam knob are in the "MIN" and "OFF"
positions.
3. Open the water inlet cover.
4. Place the iron on its heel rest and tilt forward approximately at a 45 degree angle.
5. Fill water through the water-filling inlet hole up to the MAX level mark indicated on
the side of the iron/ water tank. Never fill above this mark.
6. Close the water inlet cover and wipe off any spillages on Iron.
Note: For the best result, it is advisable to use de-mineralized water or distilled water. Do
not use chemically de-scaled water or any other liquids.
Fabric Temp.
Synthetic
fibres/Silk
MAX
Variable
steam
0
Steam Spraying
Burst water