Russell Hobbs RHI2010BL Warranty And Instruction
  1. Manuals
  2. Brands
  3. Russell Hobbs Manuals
  4. Iron
  5. RHI2010BL
  6. Warranty and instruction

Russell Hobbs RHI2010BL Warranty And Instruction

Team, spray, dry iron
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WARRANTY AND INSTRUCTION
RHI2010BL
RUSSELL HOBBS STEAM, SPRAY, DRY IRON

Advertisement

Table of Contents
loading

Related Manuals for Russell Hobbs RHI2010BL

Summary of Contents for Russell Hobbs RHI2010BL

  • Page 1 WARRANTY AND INSTRUCTION RHI2010BL RUSSELL HOBBS STEAM, SPRAY, DRY IRON...
  • Page 2 Congratulations on purchasing our Russell Hobbs Steam, Spray, Dry Iron. Each unit is manufactured to ensure safety and reliability. Before using this appliance for the first time, please read the instruction manual carefully and keep it for future reference. FEATURES OF THE RUSSELL HOBBS STEAM, SPRAY, DRY IRON •...

  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS When using any electrical appliance, basic safety precautions should always be followed including the following: 1. Please read the instructions carefully before using any appliance. 2. Always ensure that the voltage on the rating label corresponds to the mains voltage in your home.
  • Page 4 15. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not in a position where it can be pulled on inadvertently. 16. Do not allow the cord to touch hot surfaces and do not place on or near flammable goods, near an open flame, hot gas or electric burner or a heated oven.
  • Page 5 36. Always unwind and straighten the power cord before use. 37. Unplug the iron from the mains electrical supply before: • Cleaning • Filling with water or emptying the water tank • Immediately after use • When not in use •...

  • Page 6: Before First Use

    1. Handle 2. Spray button 3. Steam adjusting knob/Self-Clean 4. Water Inlet 5. Stainless Steel Soleplate 6. Water tank 7． Temperature adjustable knob 8． Pilot Light 9． Cord Guard OPERATING INSTRUCTIONS BEFORE FIRST USE Remove any protective films or stickers from the soleplate and the iron’s body. Wipe the soleplate with a dry soft cloth.
  • Page 7 HINTS AND TIPS FOR IRONING 1. Sort the articles to be ironed according to the type of fabric. This will minimize the frequency of temperature adjustment for different garments. 2. Start ironing the fabrics requiring the lowest temperature and progress to the higher ones because the iron heats up quicker than it cools down.

  • Page 8: How To Fill The Water Tank

    HOW TO FILL THE WATER TANK 1. Disconnect the appliance from main power supply outlet. 2. Ensure that the temperature dial and steam knob are in the “MIN” and “OFF” positions. 3. Open the water inlet cover. 4. Place the iron on its heel rest and tilt forward approximately at a 45 degree angle. 5.

  • Page 9: Steam Ironing

    6. After use, turn the temperature dial to the “0”/ “OFF”/ “MIN” position to switch off. 7. Disconnect the iron from mains power supply outlet. 8. Follow cleaning and maintenance instructions. STEAM IRONING This function can only be used at a higher ironing temperature – moderate or max position. 1.

  • Page 10: Burst Of Steam In Vertical Position

    Allow at least a one (1) minute interval before pressing the steam button again. Stubborn creases should be removed within three (3) steam button presses. BURST OF STEAM IN VERTICAL POSITION Burst of steam can also be applied when holding the iron in a vertical position.

  • Page 11: Cleaning And Maintenance

    10. Disconnect the iron from mains power supply outlet. 11. Hold the iron horizontally over a sink. 12. Hold/ press the self-cleaning button in and gently shake the iron to and fro. 13. Steam and boiling hot water will emit from the holes on the soleplate which contains impurities, scale, minerals and flakes (if any) that deposited in the Steam Chamber from previous use.

  • Page 12: Storing The Appliance

    • Wipe the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. Once done, buff the soleplate with a clean dry cloth. • If fiber has adhered/ stuck to the soleplate, use a damp cloth with vinegar to wipe the fiber from the soleplate.

  • Page 13: Servicing The Appliance

    No steam is being produced The temperature dial has been Set the temperature dial set to “0”/ “OFF”/ “MIN”. or leakage. to the required positioin. No burst of steam or no The (vertical) burst of steam Continue ironing vertical steam. function has been used too often horizontal position...

  • Page 14: Changing The Plug

    If the appliance still does not work after checking the above: - Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem and you need to return the appliance, make sure that: • The unit is packed carefully back into its original packaging. •...
  • Page 15 PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED. WARRANTY AND EXTENDED WARRANTY Home of Living Brands (Pty) Limited (“Home of Living Brands”) warrants to the original purchaser of this product (“the customer”) that this product will be free of defects in quality and workmanship which under normal personal, family or household use and purpose may manifest within a period of 1 (one) year from the date of purchase (“warranty period”).

Table of Contents