Self-Cleaning Function - Russell Hobbs RHI 102 Instruction And Warranty Book

Please Note: for optimum steam quality, do not operate the Burst of Steam Button
more than three times after the pilot light goes off.
VERTICAL BURST OF STEAM FUNCTION:
Warning: Do not apply steam to any clothes or fabrics while they are being worn by
humans or pets. The temperature of the steam is very high and may cause burns.

This function provides extra steam to remove wrinkles from delicate garments in
a hanging position, hanging curtains or other hanging
fabrics.

Fill the iron as described in the HOW TO FILL WITH
WATER section.

Turn the Temperature Dial in a clockwise direction to the
'●●●' setting.

Hold the iron between 15 and 30 centimetres away from
the hanging garment or fabric.

Press the Burst of Steam Button once.

Steam will penetrate into the garment removing the wrinkles.

For stubborn wrinkles wait a few seconds before pressing the Burst of Steam
button again.

Usually all wrinkles can be removed within three presses.
Please Note: It may be necessary to press the Burst of Steam Button a few times to
start this function.
Please Note: for optimum steam quality, do not operate the Burst of Steam Button
more than three times after the pilot light goes off.
SELF CLEANING FUNCTION:

This function removes the scales and mineral build-up in the Steam Chamber.
The iron will remain in the best condition if this function is performed at least
once a month or more regularly, depending on the hardness of the water being
used.

Fill the iron as described in the HOW TO FILL WITH WATER section. Fill the
tank to halfway full.

Place the iron on a stable surface in an upright standing position.

Connect the iron to the mains supply outlet.
8