Shot Of Steam; Vertical Steaming; Self Clean - Russell Hobbs 26731 Manual

Table of Contents

Advertisement

SPRAY
Water can affect some fabrics. Test this out on a hidden part of the fabric.
1.
Lift the iron off the fabric.
2.
Aim the spray nozzle at the fabric.
Press the * button – you may have to press it 2 or 3 times to pump water through the system.
3.

SHOT OF STEAM

1.
Lift the iron off the fabric.
S
2.
Press the
button.
3.
Leave 4 seconds between shots to let the temperature build up.

VERTICAL STEAMING

Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
Check that there's adequate ventilation behind the fabric, otherwise moisture may build up,
causing mildew.
Check that there's nothing behind the fabric that may be damaged by the steam.
Check that pockets, turn-ups, and cuffs are empty.
1.
Hold the iron close to (but not touching) the fabric. Hold it well away for delicate fabrics.
Press the S button.
2.
3.
Leave 4 seconds between shots to let the temperature build up.

SELF CLEAN

To avoid scale build up, use the self clean function at least monthly in normal water areas, more
often in hard water areas.
You'll need a basin or a large bowl to catch the water coming out of the soleplate.
1.
Fill the reservoir to the max mark.
2.
Set the steam control to S.
3.
Sit the iron on its heel.
4.
The light will slowly pulse on and off as your iron heats up. When your iron is ready to use,
the light will stay on.
5.
Hold the iron over the basin or bowl, with the soleplate down.
6.
Press the C, and hold it down.
7.
Gently move the iron to and fro, over the basin or bowl.
8.
Water and steam will wash scale and dust through the soleplate, and into the sink.
9.
When the reservoir is empty, release the C button.
10. Unplug the iron, and sit it on its heel to cool.
11. Follow the steps under AFTER USE AND STORING.
AFTER USE AND STORING
CAUTION: Allow the iron to fully cool before storing.
1.
Unplug the iron.
2.
Open the water inlet cover.
3.
Hold the iron over a sink, turn it upside down, and drain the water from the reservoir.
4.
Sit the iron on its heel and leave it to cool down completely.
5

Advertisement

Table of Contents
loading

Table of Contents