Panasonic UF-9000 Service Manual page 193

4) Upgrading the Main Unit's Firmware Code
Start the Local Firmware Update Tool and select the following Firmware Code Parent File Folder in
the C:\Panasonic\Panasonic-FUP\Data folder, and select the Firmware Code Type then follow the
display instructions to upgrade the Main Unit's Firmware Codes.
You must process each firmware file separately in this manner and sequence.
Parent Firmware File Folder
\ UF-9000_AU_xxxxxx
\ DP-190_180_xx_xxxxxx
Note:
1. While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.
2. Please refer to the service manual for additional details.
3. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination
location.
3. Updating the Firmware using the Master Firmware Card (Alternate method)
1. Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).
2. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning
Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC
Power Cord.)
3. Install the appropriate Master Firmware Card into the machine.
4. Turn the Power Switch on the Left Side of the machine to the ON position.
5. Press "FUNCTION", "ORIGINAL SIZE" keys and then Key "3" on the keypad sequentially.
6. Perform the Copy Service Mode F9-07-00 (Update From Master Card).
7. The firmware is copied into the machine.
8. After the update is completed, the machine reboots itself and returns to standby.
9. Turn the Power Switch on the left side of the machine to the OFF position.
10. Remove the Master Firmware Card from the machine.
11. Turn the Power Switch on the Left Side of the machine to the ON position.
12. Reprogram the F5 & F6 Parameters according to the lists printed in Step 1 above if the settings are
Ver. 1.0
Sub Firmware File Folder
\ SC_STD \ UF-9000AxVxxxxx-xx
\ SC_PCL \ UF-9000BxVxxxxx-xx
\ SC_PS \ UF-9000DxVxxxxx-xx
\ SPC \ UF-9000SPCAxVxxxxxx
\ SC_STD \ DP-180_190AxVxxxxx-xx DP-180_190AxVxxxxx-xx.bin
\ SC_PCL \ DP-180_190BxVxxxxx-xx DP-180_190BxVxxxxx_xx.bin
\ SC_PS \DP-180_190DxVxxxxx-xx
\ SPC \ DP-180_190SPCAxVxxxxxx
When you select the Parent Folder, the following Firmware Type
window appears. Proper Firmware Files are selected automatically by
selecting the Firmware Type.
The transferring order is set up automatically.
193
Firmware File
UF-9000AxVxxxxx-xx.bin
UF-9000BxVxxxxx_xx.bin
UF-9000CxVxxxxxa_xx.bin
UF-9000CxVxxxxxb.bin
UF-9000DxVxxxxx_xx.bin
UF-9000ExVxxxxxa_xx.bin
UF-9000ExVxxxxxb.bin
UF-9000SPCAxVxxxxxx.bin
DP-180_190CxVxxxxxa_xx.bin
DP-180_190CxVxxxxxb.bin
DP-180_190DxVxxxxx_xx.bin
DP-180_190ExVxxxxxa_xx.bin
DP-180_190ExVxxxxxb.bin
DP-180_190SPCAxVxxxxxx.bin
UF-9000
DP180/190
Transferring
Order
1
1-1
1-2
1-3
1-1
1-2
1-3
2
1
1-1
1-2
1-3
1-1
1-2
1-3
2
JAN 2004