Panasonic UF-9000 Service Manual page 157

5.1.8. F9 Mode: Unit Maintenance
Set the machine to Service Mode and press "9" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press "V", "/\" arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press "SET" key.
↓
When the "CLEAR" key is pressed, the selected code input will not be accepted.
↓
Press "STOP" key, then press "FUNCTION" and "CLEAR" keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
Service
Mode
F9 Unit
Maintenance
Ver. 1.0
Item
00 Fax Function Parameter
01 Service Alert Tel #
02 Firmware 00 SC
Version
01 SC Boot
02 PNL
03 SPC (Scanner)
04 Printer
05 FAX Modem
06 Not Used
07 SC2
03 Print 00 F5/F6 Parameters
Device Info.
01 Machine Information Prints the machine setup information list.
02 Counter Information Prints the Counter information list.
03 System Address
Info.
04 RAM Address
Information
04 RAM Edit 0 Relative Address
Mode
1 Absolute Address
05 Serial Number
F9 Mode
Displays the contact number when a
machine malfunction occurs.
Displays the firmware version for SC.
Displays the firmware version for SC
Boot.
Displays the firmware version for PNL.
Displays the firmware version for SPC.
Displays the firmware version for
finisher.
Displays the firmware version for FAX
option 1.
Displays the firmware version for Slot 1.
Prints the memory contents of the F5
and F6 modes.
Prints the system memory setting.
Prints the RAM data dump list.
Setting of Relative address.
Setting of Real address.
Registration of Serial Number for
Maintenance.
Clears by Shipment Set.
157
UF-9000
DP-180/190
Remarks
JAN 2004