Panasonic UF-9000 Service Manual page 152

No.
34 TDC Min. Read Only
35 TDC Avg. Read Only
36 Paper Loop (Tray 1)
37-38 Not Used
39 LSU Unit PWM Adjust
40 Trans Current Side 1
41-43 Not Used
44 FAX Laser Duty Adj
45 Not Used
46 PRINTER Laser Duty Adj
47-48 Not Used
49 TEXT Image Density
50 T/P Image Density
51 PHOTO Image Density
52 Not Used
53 CCD Read Position
54 TEXT Mode Contrast
55 T/P Mode Contrast
56 PHOTO Mode Contrast
57-62 Not Used
63 Lead Edge Read Timing
64 Side Edge Read Adjust
65-66 Not Used
67 ADF Image Density
68 Not Used
69 Stamp Position Adjust
70-78 Not Used
79 MTF Adjust
Ver. 1.0
Item
Set by Digital QUANTUM (QUARC) control
Set by Digital QUANTUM (QUARC) control
Individual Fine Adjustment for Tray 1
Adjustment of PWM value of LSU.
Adjustment of Transfer Current.
Printer Density Adjustment for FAX.
(-) : Darker.
(+) : Lighter.
Printer Density Adjustment for Printer.
(-) : Darker.
(+) : Lighter.
Image density adjustment for Text mode.
(-) : Darker.
(+) : Lighter.
Image density adjustment for Text/ Photo
mode.
(-) : Darker.
(+) : Lighter.
Image density adjustment for Photo mode.
(-) : Darker.
(+) : Lighter.
Adjustment of CCD read position.
Adjustment of Contrast for Text Mode.
Adjustment of Contrast for Text/Photo Mode.
Adjustment of Contrast for Photo Mode.
Adjustment of Lead Edge Read Point.
Adjustment of Side Edge Read Point.
Compensation of ADF image density.
Adjustment of verification stamp position.
Adjustment of Scanning Sharpness by digital
image processing for Text /Photo Copy Mode.
F6 Mode
Remarks
152
UF-9000
DP-180/190
Setting
Range
-99 - +99
(Read only)
-99 - +99
(Read only)
-99 - +99
0.176mm
-32 - +32
-77 - +76
0.15uA
-99 - +99
-99 - +99
-99 - +99
-99 - +99
-99 - +99
-42 - +44
0.2mm
-128 - +127
-128 - +127
-128 - +127
0 - +9
0.5mm
0 - +9
0.5mm
-99 - +99
-50 - +50
0.3mm
-2 - +2
JAN 2004