Panasonic UF-9000 Service Manual page 165

No. Parameter
078~ Not Used
079
080 Doc Top Feed
081 Doc End Feed
082 JAM Length
083 Not Used
084 Line As No Paper 1 = Ring (ring)
085~ Not Used
086
087 Darker Level
088 Normal Level
089 Lighter Level
090~ Not Used
091
092 Smoothing
093 ~ Not Used
094
095 Reduction Ratio
096 ~ Not Used
101
102 Book Top Feed
103 Book End Feed
104~ Not Used
109
110 MAC Address
111 Not Used
112 Insert EMAIL TXT 1 = Off
113 Not Used
Ver. 1.0
Function Parameter Table
Selections
-99
~
+99
-90
~
+127
1 = 1 m
2 = 2 m
2 = Busy (keep line busy)
0 = Lightest Contrast
~
15 = Darkest Contrast
1 = Off
2 = On
(70-100)
-30
~
+30
-9
~
0
2 = On
Adjusts the distance between the scanning sensor
ON position and the scanning start position.
Adjusts the distance between the scanning sensor
OFF position and the scanning end position.
Selects the maximum length of the original that can
be scanned.
Selects whether to ring or send a busy tone to the
remote station when the recording paper runs out or
the unit cannot receive because of any trouble.
Selects the contrast level.
0← →15
Lightest← →Darkest
Selects whether the smoothing function is available.
Selects Print Reduction Ratio(%).
Adjustment of original registration detection timing.
Adjustment of trail edge void.
Indicates the MAC Address.
Selects whether the Text Template (email message)
is programmable and added on all email sent in the
message body above the top line of text. (Up to 40
characters Programmed in the User Parameters.)
Note:
After enabling this feature, aside from entering
the text in the User Parameters, it also has to be
activated in each Auto Dial Number before it will
take effect. It does not work for Direct Dialed
Numbers.
165
UF-9000
DP-180/190
Function
JAN 2004