Brother MFC-J2730DW User Manual page 776

Level 1
Web Connect
Settings
Network I/F
Network Reset
[Settings] > [All Settings] > [Print Reports]
Level 1
XMIT Verify
Address Book
Fax Journal
User Settings
Network Configuration Print a list of your Network settings.
WLAN Report
Caller ID History
[Settings] > [All Settings] > [Machine Info.]
Level 1
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check -
[Settings] > [All Settings] > [Initial Setup]
Level 1
Date & Time
Station ID
Tone/Pulse
(Available only for some
countries.)
Fax Auto Redial
Dial Tone
Phone Line Set
Compatibility
Level 2 Level 3
Proxy User Name
Settings
Password
- -
- -
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information about the last 30 received faxes and
telephone calls.
Level 2 Descriptions
- Check your machine's serial number.
Main Version Check your machine's firmware version.
- Update your machine to the latest firmware.
View firmware information on the Home screen.
Level 2
Date
Time
Auto Daylight Set the machine to change automatically for Daylight Saving
Time Zone
Fax
Name
-
-
-
-
-
Level 4
-
-
-
-
Descriptions
Add the date and time on the screen and in the headings of the
faxes you send.
Time.
Set your time zone.
Enter your name and fax number so it appears on each page you
fax.
Select the dialling mode.
Set the machine to redial the last fax number if the fax did not go
through because the line was busy.
Shorten the dial tone detect pause.
Select the telephone line type.
Adjust the equalisation for transmission difficulties.
Descriptions
Change the Web connection
settings.
Select the network connection
type.
Restore all network settings
back to the factory settings.
769