Before Using Your Machine - Brother MFC-J2730DW User Manual

Hide thumbs Also See for MFC-J2730DW:

Table of Contents

Introduction to Your Brother Machine

Before Using Your Machine

Before attempting any printing operation, confirm the following:

Make sure you have installed the Brother software and drivers.

For USB or network cable users: Make sure the interface cable is physically secure.

Selecting the correct type of paper

For high quality printing, it is important to select the correct type of paper. Be sure to read the information about

acceptable paper before buying paper, and to determine the printable area depending on the settings in the

printer driver.

Simultaneous printing, scanning and faxing

Your machine can print from your computer while sending or receiving a fax into memory or while scanning a

document into the computer. Fax sending will not be stopped during printing from your computer. However, when

the machine is copying or receiving a fax on paper, it pauses the printing operation, and then continues printing

when copying or fax receiving has finished.

Firewall (Windows

If your computer is protected by a firewall and you are unable to network print, network scan, or PC-FAX, you

may need to configure the firewall settings. If you are using the Windows

software and drivers from the CD-ROM, the necessary firewall settings have already been set. If you are using

any other personal firewall software, see the User's Guide for your software or contact the software

manufacturer.

Related Information

Introduction to Your Brother Machine

> Before Using Your Machine

Firewall and you installed the Brother