Brother MFC-J2730DW User Manual page 204

Home > Scan > Scan from Your Computer (Windows
®
(Windows ) > Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows
Scan Both Sides of a Document Automatically Using ControlCenter4
Home Mode (Windows
Related Models: MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
Select Home Mode as the mode setting for ControlCenter4.
1. Load documents in the ADF.
To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass.
2. Click the (ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Under Document Type, select Custom, and then click the Custom Settings button.
The Custom Scan Settings dialog box appears.
5. Select the 2-sided Scanning check box.
6. Select the Long-edge binding or Short-edge binding option, depending on the Original layout.
7. Configure other Custom Scan Settings, if needed.
8. Click OK.
9. Click (Scan).
The machine starts scanning, and the scanned image appears in the image viewer.
10. Click the left or right arrow buttons to preview each scanned page.
11. Do one of the following:
®
) >
®
)
Scan Using ControlCenter4 Home Mode
®
)
197