Brother MFC-J2730DW User Manual page 337

Home > Fax > Receive a Fax
Forward Faxes Remotely
Call your Brother machine from any touch-tone telephone or fax machine to forward incoming faxes to another
machine.
• You must turn on Fax Storage , or Fax Preview before you use this feature.
1. Dial your fax number.
2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one
long beep, you have messages.
3. When you hear two short beeps, press 9 6 2.
4. Wait for the long beep, and then use the dial pad to enter the fax number (up to 20 digits) of the remote fax
machine where you want your fax messages sent, followed by # #.
You cannot use * and # as dial numbers but you can press # to insert a pause in the fax number.
5. Hang up after you hear one long beep. Your Brother machine will forward any incoming faxes to the fax
number you entered. The other fax machine will then print your fax messages.
Related Information
• Remote Fax Retrieval
• Store Incoming Faxes in the Machine's Memory
• Remote Retrieval Commands
> Remote Fax Retrieval > Forward Faxes Remotely
330